Single Use Temperature Sensors
PendoTECH
PendoTECH® Single Use Temperature SensorsTM measure
temperature in your processes accurately and cost effectively. They are low
cost for single use applications where elimination of cross-contamination is
required yet robust enough and to be repeatedly cleaned and re-used. They are
designed for in-line use and perfect for filtration and chromatography
processes, filling operations, and general process monitoring. These sensors
connect to monitors via a re-usable cable. Suitable monitors include the
handheld unit TEMP-340, a PendoTECH Process Control System, or other
pre-qualified third party monitors. Also, a stand-alone transmitter is
available with a 4 to 20mA analog output. They are the alternative solution for
use with tubing to the existing temperature measurements devices on the market.
Sensor Features
To optimally adapt to tubing the sensors are available
with either a hose-barb fitting , a 1inch sanitary flange, or a luer fitting.
The hose-barb and flange sensor designs imparts no obstruction on the fluid
path that can cause a pressure drop. There is no dead-leg at the point where
the temperature is measured. The luer fitting can be connected to a variety of
fittings that can securely adapt to tubing or other devices. The temperature
sensing element is a thermistor. No calibration is required because the
temperature versus resistance for the thermistor element is well-defined within
the specified accuracy range. Within the electrical instrument, the measured
resistance is converted to the temperature. A disposable dip probe is also
available to measure temperature within a vessel.
Connection to Monitors
The hose-barb and flange sensors and dip probe connect to
the monitor via a 10ft (3.0m) long re-usable cable. One end has a molded
connector to connect to the sensor connector and the other end has a 1/4inch
headphone plug commonly used by many commercially available monitors. The luer
sensor has a custom molded connector on the 7ft (2.1m) long re-usable monitor
cable that is quickly secured to the temperature sensor. There is an alignment
guide on the sensor that prevents it from being connected improperly.
Disconnection of the cable connector from the sensors is quick and easy and the
monitor indicates the sensor has been disconnected.
Available in a variety of sizes to adapt to different
processes - a variety of hose-barb fittings, a 1inch sanitary flange and a luer
fitting
• Compatible with gamma & x-ray irradiation
• High sensitivity to temperature change
• Better than +/- 0.2°C accuracy (typ. better than 0.1°C)
in the specified range of 0-70°C
• Polysulfone material of construction for hose-barb and
flange sensors; polycarbonate material for luer
• NO calibration required, each is tested during
manufacturing to be within specification
• All fluid path materials for flange and hose-barb
sensors meet USP Class VI requirements*
• Certificate of quality included
• Manufactured in a FDA Registered, ISO 9001 certified facility
CATEGORIES: Fluid Handling
| Catalog Number | Product Name | Action |
|---|---|---|
| TEMPS-N-012 | Single use temperature sensor, non-sterile, 1/8” inlet/outlet, polysulfone | |
| TEMPS-N-012-40 | Single use temperature sensor, non-sterile, 1/8” inlet/outlet, polysulfone with Calibration Certificate | |
| TEMPS-N-025 | Single use temperature sensor, non-sterile, ¼” inlet/outlet, polysulfone | |
| TEMPS-N-025-40 | Single use temperature sensor, non-sterile, ¼” inlet/outlet, polysulfone with Calibration Certificate | |
| TEMPS-N-038 | Single use temperature sensor, non-sterile, polysulphone & stainless steel,3/8 inch hose barb | |
| TEMPS-N-038-40 | Single Use Temperature Sensor with 3/8 inch hosebarb and polysulfone body with individual Certificate | |
| TEMPS-N-050 | Single use temperature sensor, non-sterile, polysulphone & stainless steel,1/2 inch hose barb | |
| TEMPS-N-050-40 | Single Use Temperature Sensor with 1/2 inch hosebarb and polysulfone body with individual Certificate | |
| TEMPS-N-075 | Single use temperature sensor, non-sterile, polysulphone & stainless steel, 3/4 inch hose barb | |
| TEMPS-N-075-40 | Single use temperature sensor, non-sterile, 3/4” inlet/outlet, polysulfone with Calibration Certificate | |
| TEMPS-N-1-1 | Single Use Temperature Sensor, Non-Sterile, 1 inch Sanitary Flange, Polysulfone |
Single Use Temperature Sensors
PendoTECH
PendoTECH® Single Use Temperature SensorsTM measure
temperature in your processes accurately and cost effectively. They are low
cost for single use applications where elimination of cross-contamination is
required yet robust enough and to be repeatedly cleaned and re-used. They are
designed for in-line use and perfect for filtration and chromatography
processes, filling operations, and general process monitoring. These sensors
connect to monitors via a re-usable cable. Suitable monitors include the
handheld unit TEMP-340, a PendoTECH Process Control System, or other
pre-qualified third party monitors. Also, a stand-alone transmitter is
available with a 4 to 20mA analog output. They are the alternative solution for
use with tubing to the existing temperature measurements devices on the market.
Sensor Features
To optimally adapt to tubing the sensors are available
with either a hose-barb fitting , a 1inch sanitary flange, or a luer fitting.
The hose-barb and flange sensor designs imparts no obstruction on the fluid
path that can cause a pressure drop. There is no dead-leg at the point where
the temperature is measured. The luer fitting can be connected to a variety of
fittings that can securely adapt to tubing or other devices. The temperature
sensing element is a thermistor. No calibration is required because the
temperature versus resistance for the thermistor element is well-defined within
the specified accuracy range. Within the electrical instrument, the measured
resistance is converted to the temperature. A disposable dip probe is also
available to measure temperature within a vessel.
Connection to Monitors
The hose-barb and flange sensors and dip probe connect to
the monitor via a 10ft (3.0m) long re-usable cable. One end has a molded
connector to connect to the sensor connector and the other end has a 1/4inch
headphone plug commonly used by many commercially available monitors. The luer
sensor has a custom molded connector on the 7ft (2.1m) long re-usable monitor
cable that is quickly secured to the temperature sensor. There is an alignment
guide on the sensor that prevents it from being connected improperly.
Disconnection of the cable connector from the sensors is quick and easy and the
monitor indicates the sensor has been disconnected.
Available in a variety of sizes to adapt to different
processes - a variety of hose-barb fittings, a 1inch sanitary flange and a luer
fitting
• Compatible with gamma & x-ray irradiation
• High sensitivity to temperature change
• Better than +/- 0.2°C accuracy (typ. better than 0.1°C)
in the specified range of 0-70°C
• Polysulfone material of construction for hose-barb and
flange sensors; polycarbonate material for luer
• NO calibration required, each is tested during
manufacturing to be within specification
• All fluid path materials for flange and hose-barb
sensors meet USP Class VI requirements*
• Certificate of quality included
• Manufactured in a FDA Registered, ISO 9001 certified facility
CATEGORIES: Fluid Handling
| Catalog Number | Product Name |
|---|---|
| TEMPS-N-012 | Single use temperature sensor, non-sterile, 1/8” inlet/outlet, polysulfone |
| TEMPS-N-012-40 | Single use temperature sensor, non-sterile, 1/8” inlet/outlet, polysulfone with Calibration Certificate |
| TEMPS-N-025 | Single use temperature sensor, non-sterile, ¼” inlet/outlet, polysulfone |
| TEMPS-N-025-40 | Single use temperature sensor, non-sterile, ¼” inlet/outlet, polysulfone with Calibration Certificate |
| TEMPS-N-038 | Single use temperature sensor, non-sterile, polysulphone & stainless steel,3/8 inch hose barb |
| TEMPS-N-038-40 | Single Use Temperature Sensor with 3/8 inch hosebarb and polysulfone body with individual Certificate |
| TEMPS-N-050 | Single use temperature sensor, non-sterile, polysulphone & stainless steel,1/2 inch hose barb |
| TEMPS-N-050-40 | Single Use Temperature Sensor with 1/2 inch hosebarb and polysulfone body with individual Certificate |
| TEMPS-N-075 | Single use temperature sensor, non-sterile, polysulphone & stainless steel, 3/4 inch hose barb |
| TEMPS-N-075-40 | Single use temperature sensor, non-sterile, 3/4” inlet/outlet, polysulfone with Calibration Certificate |
| TEMPS-N-1-1 | Single Use Temperature Sensor, Non-Sterile, 1 inch Sanitary Flange, Polysulfone |